Connect to the Daisy - If this is your first time here, follow the steps in Help section below
Connect the Daisy to the Computer
Enter the system bootloader by holding the BOOT button down, and then pressing, and releasing the RESET button.
Click the Connect button at the top of the page.
Select, "DFU in FS Mode"
Now do either of the following:
Flash the blink example
Select a platform and an example from the drop down menu (descriptions, diagrams, etc. coming soon)
Click the Choose File button, and select the .bin file you would like to flash. This can be found in a projects "build" folder.
Click Program, and wait for the progress bar to finish.
Now, if the program does not start immediatley, pressing RESET on the Daisy will cause the program to start running.
On windows, you may have to update the driver to WinUSB. To do this, you can download the free software, Zadig. Instructions for this can be found on the DaisyWiki in the Windows toolchain instructions page.
In order to use this, you will need:
An up-to-date version of Chrome, at least version 61 or newer
A Daisy Seed SOM. (The user-uploaded binary will work for any STM32 chip with a built in DFU bootloader).